Beginner's guide

So you're building your own arcade cabinet

Building an arcade cabinet mixes woodworking, wiring and a little Linux into something your whole household will play. A tabletop bartop is a weekend project; a full upright is a bigger build. Here's how to choose a cabinet style, which computer to put inside, the joysticks and buttons that feel right, and the legal way to fill it with games.

By Colin B. · Published November 8, 2026 · Last reviewed November 8, 2026

The 60-second version

If you only buy 3 things to start:

  1. LVL23 2 Player Bartop Arcade Cabinet Kit for 19" to 23" Screens — A flat-pack bartop cabinet for 19 to 23 inch screens, cut for HAPP or Sanwa controls, about $160.
  2. 2 Player Arcade Games DIY Kit (2 Joysticks, 20 LED Buttons, 2 Zero Delay Encoders) — EG Starts' two-player kit: joysticks, 20 LED buttons and USB encoders for about $45.
  3. Raspberry Pi 5 4GB — A Raspberry Pi 5 runs classic arcade games and the RetroPie or Batocera front ends with ease.
Budget total
$397
Typical total
$433
A bartop kit, a Raspberry Pi 5, a two-player control kit and a 22-inch monitor come to about $397. Swap in the Acer monitor and add T-molding trim and you're near $433. Add about $25 for the Pi's power supply, case and memory card if you don't already have them.

We earn commission when you buy through links on this page, including Amazon. See our affiliate disclosure. Price tiers and budget totals shown above are editorial estimates; actual prices vary.

At a glance

Our top pick in each category

The fastest path through this guide — each best-starter pick by category. Scroll for the budget and upgrade alternatives.

CategoryTop pickPriceWhere to buy
Cabinet kitsLVL23LVL23 2 Player Bartop Arcade Cabinet Kit for 19" to 23" Screens$$$ See on Amazon →
ComputersRaspberry PiRaspberry Pi 5 4GB$$$ See on Amazon →
ControlsEG STARTS2 Player Arcade Games DIY Kit (2 Joysticks, 20 LED Buttons, 2 Zero Delay Encoders)$$ See on Amazon →
MonitorsAcer19.5in 1600x900 75Hz Professional Office Monitor K202Qbi$$ See on Amazon →
Before you buy anything

A few things worth knowing first

Pick a cabinet style first. A bartop sits on a table, takes a weekend to build and fits a 19 to 32 inch screen. A full upright is the real arcade experience but needs serious space and tools. Modding an Arcade1Up is the quickest route to an upright, since the cabinet and controls are already built.

Match the computer to the games. A Raspberry Pi 5 handles classic 1980s and 1990s arcade games beautifully. A small Windows mini PC is better for later 3D arcade games, light guns and front ends like LaunchBox.

Only play games you're allowed to. Downloading commercial ROMs you don't own is copyright infringement in most countries. Legal options include freely released ROMs listed on the MAME site, homebrew games and dumping your own boards and cartridges.

The gear

What you actually need

Flat-pack plywood cabinet panels laid out before assembly

Photo by Josh Davies on Unsplash

Cabinet kits

Flat-pack kits come with cut panels, a control panel drilled for joysticks and buttons, and assembly hardware. You add the monitor, computer, controls and speakers. That saves you designing and cutting, which is the hardest part for most beginners. Check which screen size the kit fits and whether the control panel is drilled for HAPP or Sanwa parts.

Cabinet kits — what's the difference?

A few common shapes, each making a different trade.

Bartop

Sits on a table or counter. A weekend build that fits a 19 to 32 inch screen.

Build time
A weekend
Space
Tabletop
Tools
Screwdriver, drill, glue

Best for First builds, apartments, two-player classics

Tradeoff Less of the standing arcade feel

↓ See our pick
Arcade1Up mod

Buy a ready-made cabinet and swap the board for a Pi or PC with more games.

Build time
An afternoon to a weekend
Space
Floor, about 2 x 2 ft
Tools
Screwdriver, some wiring

Best for Wanting an upright without woodworking

Tradeoff Smaller than a real arcade cabinet

↓ See our pick
LVL23 2 Player Bartop Arcade Cabinet Kit for 19" to 23" Screens Best starter
LVL23

2 Player Bartop Arcade Cabinet Kit for 19" to 23" Screens

$159.99 as of Nov 8, 2026

Our rating · In Stock

A two-player bartop kit that takes a 19 to 23 inch monitor, with the control panel offered drilled for either HAPP controls with 28 mm buttons or Sanwa-style controls with 30 mm buttons. Controls, screen and computer are bought separately. About $160. 8 reviews at 3.8 stars.

What we like

  • No cutting or design work
  • Choice of HAPP or Sanwa drilling
  • Fits common 19 to 23 inch monitors

What to know

  • Very few reviews
  • Controls and screen sold separately
LVL32 2 Player Bartop Arcade Cabinet Kit for 27 to 32 Inch Screens Upgrade pick
LVL32

2 Player Bartop Arcade Cabinet Kit for 27 to 32 Inch Screens

$229.99 as of Nov 8, 2026

Our rating · In Stock

A larger bartop for a 27 to 32 inch screen, for a bigger picture that's easier to play from a couple of feet back. Same idea as the LVL23: cut parts and hardware, with your own monitor and controls. About $230. 8 reviews at 4.3 stars.

What we like

  • Room for a much bigger screen
  • Two-player layout

What to know

  • Takes a lot of table space
  • Few reviews
Pac-Man Deluxe Arcade Gaming Cabinet Specialty pick
Arcade1Up

Pac-Man Deluxe Arcade Gaming Cabinet

$549.99 as of Nov 8, 2026

Our rating · In Stock

A finished upright cabinet with 14 classic games built in. Many builders play it as-is for a while, then mod it with a Raspberry Pi or mini PC. The fastest way to an upright in your living room. About $550. 997 reviews at 4.6 stars.

What we like

  • Ready to play out of the box
  • Upright cabinet without woodworking
  • Popular base for mods

What to know

  • Expensive starting point
  • Smaller than real arcade cabinets
25ft Roll of 3/4" Plastic T-Molding for Arcade Cabinets Specialty pick
Generic

25ft Roll of 3/4" Plastic T-Molding for Arcade Cabinets

$20.99 as of Nov 8, 2026

Our rating · In Stock

The plastic edge trim that gives a cabinet its classic arcade look and covers rough MDF edges. A 25-foot roll of 3/4-inch molding is enough for a bartop. About $21. 108 reviews at 4.7 stars.

What we like

  • Instant arcade look
  • Covers rough panel edges

What to know

  • Panels need a slot cut for it

Computers

The computer runs the emulators and a front end, the menu you scroll through to pick a game. A Raspberry Pi with RetroPie or Batocera is the classic choice: cheap, quiet and great for 1980s and 1990s arcade games. A small Windows mini PC costs more but runs later 3D arcade games and Windows front ends like LaunchBox and BigBox.

Raspberry Pi 5 4GB Best starter
Raspberry Pi

5 4GB

$127.49 as of Nov 8, 2026

Our rating · In Stock

The board behind most home arcade builds, with plenty of power for classic arcade and console emulation through RetroPie or Batocera. 4GB of RAM is plenty for an arcade build. About $127. 1,600+ reviews at 4.7 stars.

What we like

  • Huge community and guides
  • Quiet and low power
  • Runs RetroPie and Batocera

What to know

  • Power supply and case extra
  • Struggles with later 3D arcade games
MINI S12 Mini PC, Intel N95, 8GB RAM, 256GB SSD Upgrade pick
Beelink

MINI S12 Mini PC, Intel N95, 8GB RAM, 256GB SSD

$239.00 as of Nov 8, 2026

Our rating · In Stock

A small Windows mini PC with a quad-core Intel N95, 8GB of RAM and a 256GB SSD. Runs Windows front ends like LaunchBox and a wider range of emulators than a Pi, with storage built in. About $239. 1,100+ reviews at 4.4 stars.

What we like

  • Runs Windows front ends
  • Built-in SSD storage
  • Handles more demanding emulators

What to know

  • Costs more than a Pi
  • Fan noise under load
An arcade joystick with a red ball top on a control panel

Photo by Steve DiMatteo on Unsplash

Controls

Joysticks, buttons and a USB encoder are the heart of the cabinet. The encoder turns stick and button presses into a USB game controller the computer understands. Buy a kit with everything matched for your first build. Japanese-style Sanwa sticks feel light and precise; American-style HAPP sticks are stiffer, like classic US arcades.

2 Player Arcade Games DIY Kit (2 Joysticks, 20 LED Buttons, 2 Zero Delay Encoders) Best starter
EG STARTS

2 Player Arcade Games DIY Kit (2 Joysticks, 20 LED Buttons, 2 Zero Delay Encoders)

$44.99 as of Nov 8, 2026

Our rating · In Stock

Two joysticks, 20 LED-lit buttons, two zero-delay USB encoders and the wiring to connect them. Plug-and-play with Raspberry Pi and Windows. The easiest way to wire a two-player panel. About $45. 507 reviews at 4.5 stars.

What we like

  • Everything for two players
  • No soldering needed
  • LED buttons look great

What to know

  • Joysticks feel cheaper than Sanwa
Arcade Buttons 1 Player DIY Kit with LED Buttons Budget pick
EG STARTS

Arcade Buttons 1 Player DIY Kit with LED Buttons

$25.99 as of Nov 8, 2026

Our rating · In Stock

A one-player kit with a joystick, LED buttons and an encoder. Enough for a single-player build or for testing the software before committing to a two-player panel. About $26. 610 reviews at 4.4 stars.

What we like

  • Cheap way to start
  • Same plug-and-play wiring

What to know

  • One player only
JLF-TP-8YT Original Joystick Specialty pick
SANWA

JLF-TP-8YT Original Joystick

$28.95 as of Nov 8, 2026

Our rating · In Stock

The genuine Sanwa stick used in many Japanese arcade cabinets and fight sticks. Adjustable for 4-way or 8-way play and noticeably smoother and more precise than kit joysticks. A common first upgrade. About $29 per stick. 1,900+ reviews at 4.6 stars.

What we like

  • Genuine arcade-grade stick
  • Switchable 4-way or 8-way
  • Smooth, precise feel

What to know

  • Needs a Sanwa-compatible mounting

Monitors

Match the monitor to the kit: the LVL23 takes 19 to 23 inch screens. A basic office monitor is fine, because classic arcade games run at very low resolutions. Look for HDMI input, a thin bezel and a VESA mount or flat back. Built-in speakers are handy for a first build, but a small pair of USB speakers usually sounds better.

19.5in 1600x900 75Hz Professional Office Monitor K202Qbi Best starter
Acer

19.5in 1600x900 75Hz Professional Office Monitor K202Qbi

$79.99 as of Nov 8, 2026

Our rating · In Stock

A 19.5-inch monitor that fits the small end of a 19 to 23 inch bartop kit, leaving room around the screen for a bezel. Plenty sharp for classic arcade games. About $80. 530 reviews at 4.4 stars.

What we like

  • Fits compact bartop kits
  • Plenty for classic games

What to know

  • Not 1080p
22-Inch 75Hz 1080p LED Monitor Budget pick
Sceptre

22-Inch 75Hz 1080p LED Monitor

$64.97 as of Nov 8, 2026

Our rating · In Stock

A cheap 22-inch 1080p monitor with HDMI and VGA inputs and built-in speakers, at the large end of what the LVL23 kit fits. A bigger screen for less money. About $65. 681 reviews at 4.5 stars.

What we like

  • Bigger screen for less
  • Built-in speakers

What to know

  • Measure your kit carefully first
Going deeper

Your first month building an arcade cabinet

A bartop arcade is a perfect first build: a little software, a little wiring and a little woodworking. Here's a four-week plan that gets the software right first, then the controls, then the cabinet, so you finish with a machine that actually works.

Green arcade buttons and a joystick on a control panel
Photo by Jack Pierce on Unsplash

The most common first-build mistake is assembling the cabinet first and then discovering the software or wiring doesn’t work. Flip the order. Get the computer and controls working on your desk, then put them in a box.

Week 1: Software on the bench

Flash RetroPie or Batocera onto a microSD card for your Raspberry Pi, or install LaunchBox on a mini PC. Connect it to a TV or monitor with a USB keyboard and learn the front end: adding games, setting video options and navigating menus.

Load a few legally free arcade games from the MAME site, or homebrew titles, and make sure they run smoothly. This week is about learning where the settings live, before you’re doing it crouched behind a cabinet.

A digital screen displaying the words GAME OVER in red pixelated letters
Photo by Compagnons on Unsplash

Week 2: Controls on the desk

Unbox the joystick and button kit and connect everything to the encoders on a table. Plug the encoders into the computer, then map the controls in the front end: player 1 and player 2 joysticks, buttons, start and coin.

Decide on a button layout before you mount anything. Most two-player panels use six buttons per player in two rows of three, plus start and coin buttons. Write the mapping down; you’ll need it again.

Week 3: Build the cabinet

Dry-fit every panel before gluing so you understand how it goes together. Then glue and screw the sides, base and top, checking that it’s square. If your kit has a slot for T-molding, tap it in with a rubber mallet, starting at the bottom back corner.

Mount the controls in the control panel, the monitor behind the bezel and the computer on a shelf inside. Leave room for airflow and an easy way to reach the power and USB ports.

A row of arcade cabinets with stools in a pink-lit arcade
Photo by Matt & Chris Pua on Unsplash

Week 4: Finish and tune

Route cables neatly with zip ties and a power strip with one switch, so the whole cabinet turns on and off together. Add art, a marquee light or speakers if you like.

Then tune. Turn off games you’ll never play, set up favorites, and try a CRT-style shader for that authentic arcade glow. Invite people over. A cabinet only feels finished once someone else has played it.

What not to worry about yet

Don’t worry about light guns, trackballs, coin doors or a full upright. Get a bartop running smoothly with a curated list of games you love.

Ready to choose your parts? See our arcade cabinet building gear guide.

Save your money

What you don't need yet

Beginners get pressured to buy a lot of stuff that doesn't help them play better. Here's what we'd skip on day one.

  • A full upright cabinet build — Uprights need a lot of plywood, tools and space. Build a bartop first and learn the wiring and software on a smaller project.
  • A light gun or trackball — They're fun for specific games but complicate the build. Add them once your cabinet runs reliably.
  • A CRT monitor — CRTs look authentic but are heavy and hard to find. Modern front ends have CRT-style filters that get you close.
  • A coin door — It's pure decoration on a home build. A start button does the same job.
First week

Your first seven days

A short, real plan to get from gear-on-doorstep to actually playing.

  1. Choose a cabinet style and order a kit, controls, a computer and a monitor that fits. · Buy
  2. Set up RetroPie or Batocera on the Pi and test it with a USB keyboard before building anything. · Learn
  3. Wire the joysticks and buttons to the encoders on a table and map them in the front end. · Action
  4. Dry-fit the cabinet panels, then glue and screw them together. · Action
  5. Mount the controls, monitor and computer, and route the cables neatly. · Action
  6. Load legally free arcade games from the MAME site and play your first game. · Action
FAQ

Common questions

Is it legal to build an arcade cabinet?

Building the cabinet and running emulators is legal. Downloading commercial ROMs you don't own the rights to generally isn't. Stick to freely released ROMs, homebrew games, legally purchased collections or dumps of boards and cartridges you own.

Raspberry Pi or mini PC?

A Raspberry Pi 5 is cheaper and quieter and is excellent for classic arcade games. A mini PC runs Windows front ends and more demanding emulators. Start with a Pi unless you know you want later 3D arcade games.

Bartop or full-size upright?

Bartop for a first build. It's cheaper, faster and fits on a table. Full uprights feel more authentic but need about 2 by 3 feet of floor space and much more woodworking.

Sanwa or HAPP controls?

Sanwa sticks and buttons are light, sensitive and popular for fighting games and Japanese shooters. HAPP controls are stiffer, like 1980s American arcades. Neither is wrong; check which your kit's control panel is drilled for.

How hard is the wiring?

With a zero-delay encoder kit, it's plug-and-play: each button and joystick connects to the encoder with a pre-made cable, and the encoder plugs into USB. No soldering is needed.

Can I modify an Arcade1Up cabinet?

Yes, it's one of the most popular projects in the hobby. Builders replace the original board with a Raspberry Pi or PC, reuse or upgrade the controls and often swap the screen. Expect to void the warranty.

Going further

Where to next

Browse by category

Authoritative sources

  • RetroPie Documentation — Step-by-step setup for the most popular Raspberry Pi arcade software, including controller mapping.
  • MAME: Free ROMs — Arcade games whose rights holders have allowed free, legal distribution for use with MAME.
  • r/cade — Home arcade builders sharing cabinet builds, wiring help and Arcade1Up mods.